基于距离相关系数和KNN回归模型的森林蓄积量估测研究

【目的】探究Landsat8 OLI数据和KNN算法在森林蓄积量估测中的潜力。【方法】以湖南省湘潭县为研究区,采用Landsat8 OLI数据和同时期的二类调查数据,通过距离相关系数筛选特征,分别采用线性回归模型(MLR)、K-近邻模型(KNN)、距离加权KNN模型(DW-KNN)和优化欧式KNN模型(FW-KNN)对森林蓄积量进行估测。使用十折交叉方法进行精度检验,对检验结果进行对比分析。【结果】3种KNN模型的估测结果均高于传统的线性模型,并且在3种KNN模型中,FW-KNN算法效果最好,决定系数达到0.69,为3种模型中最高;3种KNN模型中,本研究优化欧氏距离KNN模型的估测精度最高,其均方根误差为30.3%,相比于传统KNN模型的均方根误差降低了5.1%,相比于DW-KNN模型降低了3.3%。【结论】采用DW-KNN蓄积量估测结果明显优于其他两种模型,说明通过特征与蓄积量的相关性优化样本间的距离是一种可行的KNN优化方法。     

播期对河套地区玉米灌浆进度的影响

旨在为玉米的高产栽培提供理论支撑。采用分期播种法,利用试验数据,建立28个生长模型（方程均通过0.01的极显著检验）,将玉米灌浆期百粒干重、百粒体积随灌浆日数增加的时段分为三阶段,即渐增期、快增期和缓增期。适时播种的玉米吐丝后百粒体积、百粒干重增加进入渐增期,终止日分别为吐丝后的6天和20天,此后进入快速增长期,时间分别为22天和18天;其后到籽粒体积和干重增加进入缓慢增长期。适时播种的玉米百粒干重增加逐渐增长期为吐丝后活动积温区间0~502.4℃·d,增幅0.014 g/℃·d;快速增长期为吐丝后活动积温区间502.4~938.4℃·d,增幅0.049 g/℃·d;缓慢增长期为吐丝后活动积温区间938.4~1355.1℃·d,增幅0.018 g/℃·d。     

根据盗伐、滥伐林木现场树坑作相应林木材积估测

介绍了在盗伐、滥伐林木现场仅有树坑的情况下，利用相应小班森林资源规划设计调查资料或相近林分调查资料对被盗伐、滥伐林木作材积估测的方法，并举例说明。     

进口木地板坯料应注意的问题

本文提出了进口木地板坯料时应考虑南北气候差异及木材密度等材性差异来确定留有不同的加工余量，并建议海关按照国际惯例制定以净尺寸材积作为计税材积的标准，避免各港口实行不同征税标准，给企业进口地板坯料带来诸多困难。该建议已引起海关总署重视，并委托国家林业局起草单耗标准。     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

河南省杨树材种出材率表的研编

用削度方程和单株带皮—去皮胸径的转换关系式两个模型对河南省杨树进行计算机理论造材．经精度检验，满足要求，方法可行，依此编制了河南省杨树材种出材率表。     

一种大规模体数据压缩体绘制策略

针对基于GPU的大规模体数据直接体绘制过程中遇到的显存不足的问题，提出了一种大规模体数据的压缩绘制策略.该策略结合小波变换和分类矢量量化进行数据压缩，采用基于GPU的光线投射算法进行绘制，在绘制时，只解压变换当前绘制所需要的极少数数据，并结合多分辨率绘制，实现实时交互.基于CUDA的实验表明：该压缩绘制策略有效解决了显存不足问题，并且在保证交互绘制帧率的前提下获得了较好的成像质量.     

炭化条件对竹原纤维炭孔隙结构的影响分析

为研究炭化竹原纤维的特性,进一步提升竹原纤维的使用性能,拓宽竹原纤维的应用领域,采用可控电炉制备了不同炭化温度和不同保温时间条件下的炭化竹原纤维,利用全自动比表面积及孔隙度分析仪测试了炭化竹原纤维的比表面积、比孔容及平均孔径,探讨了炭化条件对其性能的影响。结果表明：随炭化温度的升高和保温时间的延长,炭化竹原纤维的比表面积、比孔容和孔径分布先增大后减小,在较优的工艺条件下,炭化竹原纤维的比表面积和比孔容最大值分别可达819.35m2/g和0.7358cm3/g,平均孔径最小可达2.0836nm。